Precauciones y métodos de mantenimiento para el uso de la batidora de masa
Maintenance steps of Mezclador de masa
1. Frequently check the fasteners of various parts during use, and fasten them in time if they are loose;
2. The gear meshing area of this machine is lubricated with grease, and the oil is added once every half month. There are powder metallurgy bearings in the bearing housing. The oil cup on the bearing housing must be filled with oil twice every shift, otherwise the shaft and bearing shells will be glued at your own risk;
3. When mixing batter, the amount of flour added should not exceed the capacity of the noodle bucket, so as not to burn the motor;
4. If oil is found on the batter, it should be repaired in time and the oil seal should be replaced.
1. Frequently check the fasteners of various parts during use, and fasten them in time if they are loose;
2. The gear meshing area of this machine is lubricated with grease, and the oil is added once every half month. There are powder metallurgy bearings in the bearing housing. The oil cup on the bearing housing must be filled with oil twice every shift, otherwise the shaft and bearing shells will be glued at your own risk;
3. When mixing batter, the amount of flour added should not exceed the capacity of the noodle bucket, so as not to burn the motor;
4. If oil is found on the batter, it should be repaired in time and the oil seal should be replaced.